Keratherm Gap Pad Softtherm: 86/525K 1.000mm (Sheet Size: 450mm x 250mm)
Keratherm Gap Pad Softtherm: 86/525K is a high-thermal-conductivity Softtherm film that is ideal for applications where good dielectric behavior and good compressibility are required. The adhesive coating on the 86/525K variant makes it even easier to use and install, and it also provides a permanent bond between the film and the substrate.
The benefits of using Keratherm Gap Pad Softtherm: 86/525K include improved heat dissipation, reduced thermal stress, extended component life, electrical insulation, easy to use and install, good compressibility for tight tolerance applications, and optionally available with adhesive coating for permanent bonding. The product is ideal for use in power electronics, LED lighting, telecommunications, medical devices, automotive, and aerospace applications.
In addition to its excellent thermal and dielectric properties, Keratherm Gap Pad Softtherm: 86/525 is also characterized by its good compressibility. This makes it a versatile choice for a wide range of applications, where high heat dissipation and good dielectric behavior are required.
Material: 86/525K
Fiberglass: No
Adhesive: Yes
Sheet Size: 450mm x 250mm
Thickness (mm): 1.000mm
Thermal Conductivity (W/mK): 5.5
Thermal Resistance Rth (K/W): 0.4400
Hardness Shore (00/A/D): Shore 00 50-65
Datasheet
Please take note of the following information regarding orders placed at our New Jersey Warehouse and for backordered products:
For New Jersey Warehouse:
There is no minimum order quantity (MOQ) requirement for products stored in our New Jersey Warehouse.
Orders can be placed for any quantity of products available in our New Jersey Warehouse.
For Backordered Products:
Please be aware that if a product is marked as backordered, there may be a delay in fulfilling your order.
The estimated lead time for backordered products is up to 14 weeks, but please note that this is an approximate timeframe and can vary.
Additionally, there is a minimum order quantity (MOQ) of 6 sheets for backordered items. Orders placed below the MOQ will not be processed or fulfilled.
We will make every effort to fulfill your order as soon as the backordered product becomes available, provided the MOQ is met.
Important Note:
The information provided above is subject to change without prior notice.
Availability of products may vary and is subject to stock levels at the time of order placement.
We recommend reviewing the specific product details, specifications, and any applicable warranties or guarantees before making a purchase.
For any further inquiries, clarification, or additional information, please do not hesitate to contact our customer support team.
Backorder MOQ: 6 Sheets
Need Custom Die Cutting? Click Below to submit your drawing!
Custom Die Cutting
The benefits of using Keratherm Gap Pad Softtherm: 86/525K include improved heat dissipation, reduced thermal stress, extended component life, electrical insulation, easy to use and install, good compressibility for tight tolerance applications, and optionally available with adhesive coating for permanent bonding. The product is ideal for use in power electronics, LED lighting, telecommunications, medical devices, automotive, and aerospace applications.
In addition to its excellent thermal and dielectric properties, Keratherm Gap Pad Softtherm: 86/525 is also characterized by its good compressibility. This makes it a versatile choice for a wide range of applications, where high heat dissipation and good dielectric behavior are required.
Material: 86/525K
Fiberglass: No
Adhesive: Yes
Sheet Size: 450mm x 250mm
Thickness (mm): 1.000mm
Thermal Conductivity (W/mK): 5.5
Thermal Resistance Rth (K/W): 0.4400
Hardness Shore (00/A/D): Shore 00 50-65
Datasheet
Please take note of the following information regarding orders placed at our New Jersey Warehouse and for backordered products:
For New Jersey Warehouse:
There is no minimum order quantity (MOQ) requirement for products stored in our New Jersey Warehouse.
Orders can be placed for any quantity of products available in our New Jersey Warehouse.
For Backordered Products:
Please be aware that if a product is marked as backordered, there may be a delay in fulfilling your order.
The estimated lead time for backordered products is up to 14 weeks, but please note that this is an approximate timeframe and can vary.
Additionally, there is a minimum order quantity (MOQ) of 6 sheets for backordered items. Orders placed below the MOQ will not be processed or fulfilled.
We will make every effort to fulfill your order as soon as the backordered product becomes available, provided the MOQ is met.
Important Note:
The information provided above is subject to change without prior notice.
Availability of products may vary and is subject to stock levels at the time of order placement.
We recommend reviewing the specific product details, specifications, and any applicable warranties or guarantees before making a purchase.
For any further inquiries, clarification, or additional information, please do not hesitate to contact our customer support team.
Backorder MOQ: 6 Sheets
Need Custom Die Cutting? Click Below to submit your drawing!
Custom Die Cutting
| 1x | $234.18000 /SHT |
| 6x | $187.34000 /SHT |
| 11x | $168.60000 /SHT |
| 101x | $149.88000 /SHT |
| 1001x | $131.14000 /SHT |
- Material : 86/525K
- Fiberglass : No
- Adhesive : Yes
- Size : 450mm x 250mm
- Thickness (mm) : 1.000mm
- Thermal Conductivity (W/mK) : 5.5
- Thermal Resistance Rth (K/W) : 0.4400
- Hardness Shore (00/A/D) : Shore 00 50-65
| Warehouse | Qty Avail. |
|---|---|
| NJ | 5 |